Inkbird ITC-308 240V AU Pin Pre-wired Temperature Controller Make Wine Home Brew

Description

Inkbird ITC-308 230V Pre-wired Programmable Digital Heating Cooling Temperature Controller Outlet Thermostat AU Plug Socket
Features:
- Plug and play design, easy to use;
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
- Support reading with
Centigrade or Fahrenheit unit
;
Maximum output load: 2400W(240V);
- Dual display window, be able to display measured temperature and set temperature at the same time;
- Compressor delay protection for refrigeration control High and low temperature alarms are available;
-
Over-temperature and sensor fault alarm Temperature calibration;
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
-
F/C degree display
; Easy to set, PV and SV dual display windows
- Dual display window, be able to display measured temperature and set temperature at the same time
- The sensor is waterproof and is better for the freshwater tank than the saltwater tank.
- Alarm when over-temperature and sensor error
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
Specification:
- Temperature Control Range :
-50~120°C / -58~248°F
- Temperature Resolution: 0.1 ° C / 0.1° F Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
- Temperature Control Mode :On/Off Control, Heating and Cooling Input Power: 100 ~240VAC, 50Hz/60Hz
- Temperature Control Output:
Max. 10A, 100V ~240V AC  (It can apply to the voltage from 100V to 240V)
- Buzzer Alarm: High and Low
- Socket: 112 x 46 x 27 mm( 4.1 x 1.8 x 1.0 inch)
-
Sensor Type: NTC sensor (Including) Sensor Length: 2m / 6.56ft
- Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
- Storage Temperature: -20~ 60 ° C / -4~ 140 ° F Humidity 20~85% (No Condensate)
- Warranty: 1 Year
How to work:
Connect with a heater and a cooler , heating socket for heater,cooling socket for cooler.
The temperature range you want to control is: 20~30℃ ,then you can set TS=25℃, HD=5,CD=5.
When Ambient Temperature is higher than 30℃(TS+CD), it will turn on the cooler, turn off at 25℃.
When Ambient Temperature is lower than 20℃(TS-HD), it will turn on the heater, turn off at 25℃.
Package Included:
1x ITC 308 Temperature Controller with 6.65ft DC Cord Sensor (AU Plug)
1x English user Manual
On Nov-17-20 at 00:07:30 PST, seller added the following information: